The construction materials and finishes used in the manufacture of the HA Credenza version are of high quality and are available in a wide selection of aesthetically attractive finishes.
Metal-made structure. HA Credenza is built upon several parts. The structure is composed of side panels made of 2.0mm thick metal sheet, attached to the lower tray made of 1.5mm thick steel sheet. Horizontal profiles complete furniture chassis manufactured in metal finish.
The POP-UP version stores a metal-made lifting mechanism to allow display height adjustment.
In its standard version, the structure finish is in graphite, or alternatively in white RAL 9016 and aluminum gray RAL 9001.
HPL worktop surface. Worktop frame is made of compact phenolic laminate (HPL) in 12mm thickness covered with plastic laminate decoration in 0.8mm and a density of of 600kg/m3 5%. Surface edges are fixed with melted glue in ABS finish and a 2mm bevel around the piece. In addition, edges will have a rounded finish to minimise human factor risks.
Both front and rear doors are available in different materials. As standard, these are in HPL material in 10mm thickness. Alternatively, these are available in MDF board in 26mm thickness, or in sound-absorbing PET material with acoustic properties.
Standard worktop and door finishes are available in white, light gray, maple, light oak and dark oak.
Alternatively, FUSION worktop surface is available in wood particles (MDF) board, glued with synthetic resins in 26mm thickness with malmine coating. Average density of 650kg/m3. Edges are finished in 2mm thickness ABS, applied with polyurethane glue and all edges rounded to R=2mm. Joint with the structure is made using M6 metal axes and eccentrics.
Deutsch 
English 
Castellano 
Français 
Italiano 
