DS Credenza

Manufacturing materials and available finishes used in the manufacture of DS version Credenza are high quality rated and are available in a large set of high-end finishes.

Self-supporting metal structure. The DS Credenza is built upon several parts. The structure is composed of side panels made of 2.0mm thick metal sheet, attached to the lower tray made of 1.5mm thick steel sheet. Horizontal profiles complete furniture chassis manufactured in metal finish. In its standard version, structure finish is available in graphite, or alternatively in white RAL 9016 and aluminum gray RAL 9001.

HPL worktop surface. Worktop frames are manufactured in compact phenolic laminate material (HPL) in 12mm thickness covered with plastic laminate decoration in 0.8mm thickness and a density of 600kg/m3 5%. Surface edges are fixed with melted glue in ABS finish and 2mm bevel around the piece. In addition, edges will have a rounded finish to minimize human factor risks.

Both front and rear doors are available in different materials. As standard, these are also available in HPL material in 10mm thickness. Alternatively, these are available in MDF material 26mm thickness, or in sound-absorbing PET material with acoustic properties.

Standard worktop and door finishes are available in white, light gray, maple, light oak and dark oak.

Alternatively, FUSION worktop surface is available in MDF material, glued with 25mm thick synthetic resins with melamine coating at an average density of 650kg/m3. The edges are finished in ABS in 2mm thickness, applied with polyurethane glue and a rounded finish on all edges to R=2mm, thus minimising human factor risks. Joining part between worktop and metal structure is accomplished using M6 metal axes and eccentrics.